Billingham Laptop Bag Black-Black 13"

Based on the design of its bigger brothers, the Hadley Digital is manufactured to carry a DSLR with a standard lens attached. Depending on the size of your camera, it can be loaded with the grip facing up at you under the flap or with the lens pointing down into the bag.

External Dimensions:
Width 220mm
Depth 135mm
Height 225mm

The Rucksack 35 is a camera bag to appeal to the heart and the brain. Its classic styling, top gain bridal leather and solid brass fixings make it a bag of true distinction but the careful thought that has gone into all aspects of its design also make it a sensible choice for those who want an alternative to a messenger style bag.

Capacity 5.6 litres in padded insert (7 litres in whole of main compartment with padded insert removed) ---- Additional 1.8 litres in front pocket.

Weight 1.17kg

The Rucksack 35 is a camera bag to appeal to the heart and the brain. Its classic styling, top gain bridal leather and solid brass fixings make it a bag of true distinction but the careful thought that has gone into all aspects of its design also make it a sensible choice for those who want an alternative to a messenger style bag.

Capacity 5.6 litres in padded insert (7 litres in whole of main compartment with padded insert removed) ---- Additional 1.8 litres in front pocket.

Weight 1.17kg

The perfect companion on any journey. Lots of securely zipped pockets to store passports, tickets, keys and credit cards with a padded main compartment for small cameras or your Harry Potter paperback.
Made from Billingham Stormblock canvas and top grain leather trim with solid brass fittings. Features our Quick Release System front tab. The Pola comes complete with a shoulder sling and belt loops.
External Dimensions
W180 x D80 x H210mm
W7 x D3 x H8,1/4ins
A sling is included, but the Shoulder Pad is an additional extra. You will need the SP10 item if you choose this.
Item Weight: 0.5Kg

Made in England, the ‘Eventer MKII’ is perfect for carrying and protecting mirrorless system cameras, rangefinders and mid-sized DSLRs. The bag includes an SP50 Shoulder Pad and a removable padded insert, with a 14” dedicated laptop slip sewn in.

An upgraded version of the previous ‘Eventer’, the bag has several additional features that are designed to assist photographers and frequent travellers alike. The ‘Eventer MKII’ is highly weather resistant, comfortable to carry and easy to travel with, all whilst retaining the ‘Eventer’s longevity and timelessly classic aesthetics.

The ‘Eventer MKII’ was created following feedback from customers asking for the ‘Eventer’ to have popular features added, that can be found in some of the Hadley range bags and the recently released Mini Eventer. The previous ‘Eventer’ has now been discontinued.

At a glance, the most visible feature that has been changed is the top handle. The webbing that stretched the width of the top flap has been removed, to make way for a simpler, sleeker looking handle. Leather has also been added to the underneath of the handle, for additional comfort when carrying the bag.

To improve its credentials as an outdoor, working bag, weatherproof zips have replaced the previous normal zips on the main compartment and rear pocket to help protect the contents from the elements. A clever ‘TukTop’ design feature enables the zips of the main compartment to be tucked behind the walls of the padded insert, keeping them safely and neatly out the way while taking cameras in and out of the bag.

The removable insert has extra padding on the base to further increase protection for your camera gear. The dedicated padded laptop slip in the back of the insert has been retained, allowing the user to store up to a 14” laptop. The insert can easily be detached and removed using press-studs, to change this bag from a working camera bag to a stylish messenger bag in seconds.

A luggage trolley strap has been added to the rear of the bag, a simple, easy feature that helps you to secure your bag to your suitcase when travelling through busy cities or airports. Similarly to its predecessor, the bag features top-grain leather panels on the lower third of the bag on all sides, adding protection, longevity and style.

All Billingham products are made in England and are crafted from a choice of Canvas or FibreNyte materials that are bonded to a rubber butyl layer, known as the ‘Stormblock’. This layer is the reason why you will never need to re-proof your Billingham bag, the ‘Stormblock’ layer will keep your bag water-resistant for its lifetime. An additional invisible mildly hydrophobic coating on the surface of the fabric helps to reduce stains and maintain the aesthetics of the bag. Whilst the effectiveness of this coating reduces over time, the waterresistance of the butyl Stormblock layer will not.

Billingham is a small, family run business that has manufactured camera bags in England since 1973, providing a high level of protection for those in the photographic industry for decades. Billingham is renowned for using only the best materials that they have meticulously tried and tested, for their incredible attention to detail and for their bags being waterproof, robust and yet lightweight.

Every single Billingham bag is individually inspected in the UK and given a unique serial number. Billingham bags are made to the highest quality with extreme precision, ensuring maximum durability and longevity, to create a bag that you can rely on and put your trust in. All Billingham bags include a five-year manufacturer’s guarantee.

External dimensions (W x D x H) 400mm x 180mm x 350mm (inc. top handle)

Internal dimensions (W x D x H) 340mm x 120mm x 260mm

Weight (inc Shoulder Pad and Padded Insert) 1.83kg

Main compartment capacity 9 litres

Front pockets (x2) capacity 1.5 litres per pocket

Included accessories • SP50 Shoulder Pad • Removable, padded insert featuring a laptop slip compartment • Divider set (2x horizontal 2x vertical) • Eventer MKII Front Straps

The Hadley One is purpose built to take your laptop or tablet device along with a core CSC kit or DSLR body and lens combination. A larger body to the bag also makes room for day to day papers, diaries and items; while the padded insert can be moved to different places to better accommodate them.

Sized for laptops, tablets and camera gear.
Internal built in 13 inch Laptop holder.
Removable padded insert section.
Re-engineered top handle for increased comfort.
Fully adjustable and removable shoulder sling.
Luggage Trolley strap retainer.
Twin dump pockets on the front.
Rainproof zip closure on rear document pocket
Available in 2 Colours of canvas material

External Dimensions: W410mm x D190mm x H275mm
Capacity: 8.75 litres

The AVEA 5 are the same except for the choice of material - AVEA 5 for Billingham Canvas bags. They are designed to fit either onto a belt or onto the side of AVEA compatible Billingham bags. The flap is fastened with a press stud over a weatherproof drawstring top. The AVEA 5 is lightly padded with high density closed cell foam.

The AVEA 5 is designed to fit the Hadley Pro, Attorney, Panexia, Rucksack 25 and L2;

External Dimensions
W125 x D65 x H180mm
W5 x D2,1/2 x H7ins
Item Weight: 0.2Kg

Like all other Hadleys (except the Hadley Digital) the Pro comes with a removable padded insert (including a lid) made with fabric covered foam that protects your gear from all sides. Remove this insert and you can turn the Hadley Pro into a stylish messenger bag. The main flap is sculpted around the opening to prevent rain, snow or unwanted fingers getting into the bag ? perfect for street photography. Of course the rain protection doesn?t stop there ? like all Billingham bags it is made from a three layer fabric with a core of butyl rubber that is impermeable to water.

External Dimensions W350mm x D120mm x H280mm
Internal Dimensions W340mm x D80mm x H230mm
Capacity 6.00 litres
Weight 1.1 kgs (2.4 lbs)

The S2 is the smallest in the S Series range. Its small size makes it perfect for those who want to travel light with just a mirrorless, micro 4/3s or other smaller form factor camera and a couple of small lenses - like all Billinghams though it has a number of big features that make it a great fit for those who are serious about photography.

Take for example the quick release Clogball fastening that allows you to open the main covering flap with just one hand, the zip on the main flap that has two zippers to open from either end or the full length front dump pocket for a phone or roll of film. Each feature carefully thought out so that the Billingham blends easily into your shooting routine.

Not only that but the TukTop feature means that both sides of the main zipper can be tucked behind the bag's internal front and rear dividers, allowing you to pull equipment in and out of the bag.

External Dimensions W260mm x D140mm x H200mm
Internal Dimensions W210mm x D100mm x H130mm
Weight0.65 kgs -1.43 lb

At 150 x 130 x 190mm (WxDxH), the Billingham 72 is the ideal size for premium fixed lens cameras such as the Leica Q, Leica M with one small standard lens and , many other small cameras. It is also ideal for many old 35mm (and even a few 120 film) cameras of a similar size.

One of Billingham's smallest bags - designed for fixed prime, rangefinder and compact system (mirrorless) cameras with one lens.

Constructed from two overlapping layers of foam to protect the corners of heavier cameras.
Fully adjustable and removable shoulder sling.

Front dump pocket for batteries, memory cards, lens wipes, passport etc.

Constructed from a choice of 3 layer waterproof canvas or FibreNyte material.
Top grain leather and solid brass details.

5 year manufacturer?s guarantee.

Made in England.

Exclusive to UK stockists for a limited time.

Building on the success of our PressTop bags, the 07 Series represents an evolution of the design. Whilst at first glance they may look similar to their predecessors, this new range is far from being a cosmetic make-over. The changes we?ve made are the product of solid, practical trials and feedback from users and reflect the attention to detail that make Billingham bags the choice of serious photographers the world over.
Bag dimensions (mm) 207

External
A Width 320mm
B Depth 180mm
C Height 260mm

Internal
Width 290mm
Depth 150mm
Height 220mm

The Rucksack 25 is perfect for the serious photographer who wants to spread the load across both shoulders. The biggest of our two backpacks and improved from the previous design the bag is intended to carry a DSLR plus a few small to medium-large lenses with a high level of protection.

Capacity 9.4 litres with padding (11.4 litres with padding removed) - Additional 1.6 litres in front pocket.

Weight 1.59 kg

Exclusive to Red Dot Cameras

Finished in Camo material, each bag is unique. With RDC label detail

A stylish but simple camera bag that will fit a small-to-mid sized DSLR or compact system (mirrorless) camera and 2-3 small-to-medium lenses. Still popular, this bag is the predecessor to the Hadley Small Pro. Made in England with 3-layer waterproof fabric and real leather.

External Dimensions
W290 X D120 X H210mm
W11,1/2 x D4,3/4 x H8,1/4ins
Internal Dimensions
W260 x D70 x H185mm
W10,1/4 x D2,3/4 x H7,1/4ins
Item Weight: 0.7Kg

Can be used as side-pockets for many of our bags or as camera pouches in their own right. Constructed from a choice of 3 layer waterproof canvas or 3 layer waterproof FibreNyte material to match our camera bags. Real top-grain leather.
5 year manufacturers guarantee. Made in England.

NOT compatible with the following bags: S2, S3 and Leica combi Bag

Made in England, the ‘Eventer MKII’ is perfect for carrying and protecting mirrorless system cameras, rangefinders and mid-sized DSLRs. The bag includes an SP50 Shoulder Pad and a removable padded insert, with a 14” dedicated laptop slip sewn in.

An upgraded version of the previous ‘Eventer’, the bag has several additional features that are designed to assist photographers and frequent travellers alike. The ‘Eventer MKII’ is highly weather resistant, comfortable to carry and easy to travel with, all whilst retaining the ‘Eventer’s longevity and timelessly classic aesthetics.

The ‘Eventer MKII’ was created following feedback from customers asking for the ‘Eventer’ to have popular features added, that can be found in some of the Hadley range bags and the recently released Mini Eventer. The previous ‘Eventer’ has now been discontinued.

At a glance, the most visible feature that has been changed is the top handle. The webbing that stretched the width of the top flap has been removed, to make way for a simpler, sleeker looking handle. Leather has also been added to the underneath of the handle, for additional comfort when carrying the bag.

To improve its credentials as an outdoor, working bag, weatherproof zips have replaced the previous normal zips on the main compartment and rear pocket to help protect the contents from the elements. A clever ‘TukTop’ design feature enables the zips of the main compartment to be tucked behind the walls of the padded insert, keeping them safely and neatly out the way while taking cameras in and out of the bag.

The removable insert has extra padding on the base to further increase protection for your camera gear. The dedicated padded laptop slip in the back of the insert has been retained, allowing the user to store up to a 14” laptop. The insert can easily be detached and removed using press-studs, to change this bag from a working camera bag to a stylish messenger bag in seconds.

A luggage trolley strap has been added to the rear of the bag, a simple, easy feature that helps you to secure your bag to your suitcase when travelling through busy cities or airports. Similarly to its predecessor, the bag features top-grain leather panels on the lower third of the bag on all sides, adding protection, longevity and style.

All Billingham products are made in England and are crafted from a choice of Canvas or FibreNyte materials that are bonded to a rubber butyl layer, known as the ‘Stormblock’. This layer is the reason why you will never need to re-proof your Billingham bag, the ‘Stormblock’ layer will keep your bag water-resistant for its lifetime. An additional invisible mildly hydrophobic coating on the surface of the fabric helps to reduce stains and maintain the aesthetics of the bag. Whilst the effectiveness of this coating reduces over time, the waterresistance of the butyl Stormblock layer will not.

Billingham is a small, family run business that has manufactured camera bags in England since 1973, providing a high level of protection for those in the photographic industry for decades. Billingham is renowned for using only the best materials that they have meticulously tried and tested, for their incredible attention to detail and for their bags being waterproof, robust and yet lightweight.

Every single Billingham bag is individually inspected in the UK and given a unique serial number. Billingham bags are made to the highest quality with extreme precision, ensuring maximum durability and longevity, to create a bag that you can rely on and put your trust in. All Billingham bags include a five-year manufacturer’s guarantee.

External dimensions (W x D x H) 400mm x 180mm x 350mm (inc. top handle)

Internal dimensions (W x D x H) 340mm x 120mm x 260mm

Weight (inc Shoulder Pad and Padded Insert) 1.83kg

Main compartment capacity 9 litres

Front pockets (x2) capacity 1.5 litres per pocket

Included accessories • SP50 Shoulder Pad • Removable, padded insert featuring a laptop slip compartment • Divider set (2x horizontal 2x vertical) • Eventer MKII Front Straps